A few days back, I felt that the gasket sealant in my car engine wasn’t working fine; it was coming off more often than not.
Being a car enthusiast myself, I immediately understood that the gaskets in my automobile need newer and fresher adhesion to work properly.
But when it was time to choose a gasket maker for my car engine, I was confused about which one to choose from, the Permatex the Right Stuff Grey and Permatex the Right Stuff Black, two of the most popular gasket makers in the market.
However, after thorough research and comparison, I was able to find the right one for my car.
I have compared Permatex the Right Stuff Grey vs. Black in great detail here so that it also becomes easier for you to understand which of them would be suitable for you.
So, without any further ado, start reading.
Read More: Permatex Ultra Grey vs. Ultra Black
Read More: Hondabond vs. Permatex
Permatex the Right Stuff Grey vs. Black
Not only their color but there are also some other differences between the Permatex the Right Stuff Grey and Permatex the Right Stuff Black.
I have listed and compared these differences in the table below for a quick glance.
Comparison Table
| Features | Permatex the Right Stuff Grey | Permatex the Right Stuff Black |
| Color | Grey | Black |
| Heat Resistance | 450ºF | 500ºF |
| Operation Time | 1 minute | 90 minutes |
| Application | Valve covers, water pump, intake manifold end seals, thermostat housings | Oil pans, timing covers, transmission pans, differential covers |
| Vibration Resistant | Yes | No |
| Price | Moderate | Affordable |
Read More: Loctite Vs. Permatex Threadlocker
Top Differences Between Permatex the Right Stuff Grey and Black
Not only summary, I have also discussed the differences in detail for your better understanding.
Application
Because they are different gasket makers, the application of Permatex Grey and Black gasket sealants is quite different.
For starters, Permatex the Right Stuff Grey is mainly designed to seal or adhere the valve covers, water pump, intake manifold end seals, and thermostat housings in your automobile engine.
Even if your engine experiences higher torque loads, this gasket maker will still perform its best.
Similarly, Permatex the Right Stuff Black is specifically used for sealing oil pans, transmission pans, timing covers, valve covers, coolant flanges, and others.
This gasket maker will create a quick and strong seal and won’t come off anytime soon.
Read More: Permatex Form A Gasket 2 Vs. 3
Heat Resistance
As both the Permatex the Right Stuff Grey and Permatex the Right Stuff Black are gasket makes used in automotive engines, their heat resistance level is quite important.
Permatex Grey can withstand 450ºF of heat. It means that this gasket maker will hold the seal between gaskets even when the temperature rises extremely high.
But when it comes to Permatex Black, the story is a bit different. This gasket maker has a high heat-resistant level of 500ºF and will not mess up with the seal anytime soon.
Operation Time
There is something interesting about the operation time of both the Permatex Grey and Black gasket sealants.
Permatex the Right Stuff Grey works like magic. This gasket maker sets in just 1 minute and allows you to work with it almost immediately.
You don’t have to wait for a long to continue your work.
On the other hand, it takes about 90 minutes for the Permatex Black to set before you can continue with your project.
Even though it’s also not too long, compared to Permatex Grey, the operation time of Permatex Black is way too long.
Read More: Permatex Motoseal vs. Ultra Grey
Price
When it comes to the price, there is a slight difference between the Permatex Grey and Black gasket sealant.
As the Permatex Grey offers several advantages and also dries out fast for quick usage, it is a bit pricier than its competitors. But it’s worth the price.
On the other hand, the price of Permatex Black is less than the Permatex Grey. Although it also has some amazing benefits and also offers better durability, it will not cut deep into your pocket.
Read More: Permatex Cold Weld vs. JB Weld
Last Opinion
Now that you know everything about Permatex the Right Stuff Grey vs. Black, it will be much easier for you to decide which one you should buy for your automotive needs.
But if you ask me, I would say that go for the Permatex the Right Stuff Grey. This is because it not only dries out quickly but is also durable and vibration-resistant.
Even though this sealant is slightly pricier than its competitor, it will create a strong adhesion without coming off anytime soon.
