How to Open Goo Gone Bottle

If you are dealing with problems with opening the Goo Gone bottle, this article is for you. 

Goo Gone is an adhesive remover. It comes in a bottle or a spray bottle. It easily removes glue, tar, tape residue, grease, and more.

Further, it is a surface-safe product that you can use for any hard as well as carpet, upholstery, and more. 

To know how to open Goo Gone bottle, here are some methods you must know. 

Read More: How to Use Goo Gone?

Read More: How to Get Rid of Goo Gone Smell?

How to Open Goo Gone Bottle? 

Opening a bottle like the Goo Gone bottle is easy. Just like you unscrew any other bottle, you need to do the same thing with it. Hold the cap and twist it to open it. 

But if you find problems opening a bottle, you should know the reasons behind this failure. The possible reason can be that the cap is stuck. 

Let’s see what you can do if the cap of the Goo Gone bottle is stuck. 

Method 1: Try With Your Hands 

The first method is to use your hands and try to unscrew the cap. To do that, you need to hold the cap firmly and then twist it counterclockwise. If it slips, try a cloth over the lid and do the same with your hands. 

Using the cloth will make a better grip. So, do this to get the cap out to open the bottle. 

Method 2: Try A Tool 

When using your hands is insufficient, and you cannot do the previous technique, try using a tool. 

A pair of pliers is a suitable tool for this process. You can also use a rubber jar opener or a wrench. 

Hold the tool properly on the lid, then twist it. If you want a better grip, use a rubber jar opener and apply the same technique to open the cap. 

Method 3: Soaking 

Another method is soaking. All you need to do is soak the bottle in warm water and soap. It is an ideal option if you need to open a stuck bottle. 

Soak it in the mixture for some time to loosen any grime, then use a tool or your hands to unscrew it. 

Method 4: Tap 

The simplest way is to tap the spray bottle on a hard surface. It helps to loosen the lid and thus open with less effort. 

Method 5: Apply Oil 

The other way is to apply some oil on the cap area. It helps to loosen any dirt, making it unscrew the cap more easily. 

You can use oil like WD-40 and keep it for a few minutes. Then, try to unscrew it, and the lid will open smoothly. 

Read More: Goo Gone Vs. WD-40

Method 6: Apply Heat 

Applying heat is another effective way to get rid of stuck lids. You can use a hairdryer to apply heat to the area. 

Keep it on low heat and then apply it on the cap. It helps the lid to loosen a bit and is easier to turn. 

Method 5: Apply Lubricant 

Using a lubricant is also an easy option to make the cap smooth enough to open it. It is effective if the lid is stuck because of rust. 

All you need is to apply any lubricant, such as vaseline or cooking oil, around the cap and leave it for a few minutes. After that, try to unscrew the lid, and you will see the cap open easily. 

Method 6: Use Screwdriver 

Using a screwdriver is also a good option. You can use a flathead screwdriver for this process. Gently pry the cap and twist it with the help of a screwdriver to open it effortlessly. 

Also, you can use a hammer to do the same thing. Besides, making a hole in the cap can release the bottle’s pressure. So, you can do it to make the process easier. 

Tips to Follow When Opening A Goo Gone Bottle 

There are some tips to follow when applying any process of opening the cap. Firstly, you have to be gentle when doing the procedure. 

When you are using a screwdriver, make sure you do it gently. Don’t be harsh with it, or you will break the cap. 

Besides, don’t apply too much oil or any other product to the cap. It can make things worse. If none of these processes work, then it will be a wise decision to replace the product. 

Read More: Does Goo Gone Remove Super Glue?‍

Last Opinion

Now that you know how to open Goo Gone Bottle, you can apply any of the methods. Here are many ways, and you can use the other one if the previous ones are not working. 

So, get ready with all the equipment, then start the process if you are dealing with a stuck cap. 

Hopefully, you will get better results and eliminate the problem. 

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *