E6000 is a good quality, versatile device that is easy to use. But if you can’t open the E6000 glue, here are some tips.
Well, the E6000 glue is a craft adhesive. It is suitable for glass, metal, fiberglass, masonry, ceramic, and wood. It is a permanent bond adhesive. Also, it is flexible, paintable, dryer-safe, photo-safe, and washer-safe.
If you want to know how to open the E6000 glue that is stuck, you should know the details below.
Read More: How To Make E6000 Glue Dry Faster?
How To Open E6000 Glue?
The removal process of E6000 glue is easy. There are a lot of ways to open the tube. Many tools are there to pierce the opening part.
But if you cannot figure out how to pierce the sealed part of the tube, there is an easy solution that you must know. You won’t need any tool for this. Check out the method in detail.
The first step is to unpack the packet of the product. Get the tube out of it, then the following process, and then remove the cap of it.
Once you remove the cap, take the cap and turn it on over. Then, place the lid on the sealed area in the opposite direction. Push and roll it properly.
You will see the sharp part of the cap easily pierce the seal, and it is now successfully open. Now, attach the nozzle to the opening area, and it’s ready to use.
That’s all you need to do to open the E6000 glue.
Read More: E6000 Vs. E6000 Plus
Why Doesn’t E6000 Glue Open?
If you find difficulty opening the E6000 glue, there can be many reasons behind it. The reason can be the stuck tube.
If the glue around the tip of the tube is dried, the opening part will be stuck. In this case, it won’t open easily. You will face difficulty piercing the tube.
So, if it also happens to you, this can be the reason.
Read More: Does E6000 Work on Plastic?
What Can You Do to Open An E6000 Glue When It’s Stuck?
As you know why the E6000 does not open easily, you can apply some tricks when the tip is stuck.
You should always keep the tube clean. You must wipe the tip after every use. But if the tube is broken, you can store it in a zip-lock bag afterward.
Also, if you cannot open the tip, pierce the other part of the tube and use it. Store it in the same way in the zip lock bag, and your problem is solved.
Now that you know how to open E6000 glue or manage to use the glue when you cannot open the tube, you can follow the tips and get rid of the problem.
The process is easy. But if the tube is stuck, you can apply the tricks. No matter what you do, store the tube properly to avoid drying out.
These are the things to maintain to open the E6000 glue.