How To Remove Self-Adhesive Shower Door Handles

Removing self-adhesive shower door handles can be challenging. What if you aren’t sure which tool to use? Many people have trouble removing self-adhesive shower door handles without ruining the walls or the handle itself, not to mention getting hurt in the process!

With these ten steps, you’ll learn how to remove self-adhesive shower door handles safely and effectively so that you can move on with your life and get back to enjoying your shower.

Read More: Best Adhesive for Shower Walls

How to Remove Self-Adhesive Shower Door Handles?

Step 1: Assess The Damage

If your shower door handle starts to come off, it’s important to assess the damage before you begin. Otherwise, you could end up making the problem worse. To do this, look closely at the handle and the surrounding area. Look for any cracks, gaps, or other signs of wear and tear. If the handle is completely detached from the door, you’ll need to take extra care when removing it, so you don’t damage the door itself.

Step 2: Put on safety gloves

Whether you’re removing self-adhesive shower door handles or any other type of handle, it’s important to protect your hands. One way to do this is by wearing a pair of safety gloves.

Step 3: Clean The Area With Rubbing Alcohol

If the handle leaves a sticky residue, you’ll want to clean the area with rubbing alcohol before proceeding. Doing so will help ensure that the new adhesive will stick properly. You can use a cotton ball or cloth to rub it on and then let it dry for about 20 minutes. Afterward, proceed with step 4.

Read More: How to Glue Shower Walls?

Step 4: Spray WD-40

If the handle is firmly attached, you may need to use a little WD-40. Just be sure to spray it on the outside of the handle, not the inside, where you’ll be touching it. And give it a few minutes to work before you try to remove the handle again. 

1. Spray WD-40 on the outside of the shower door handle. 

2. Wait a few minutes for the WD-40 to work its magic. 

3. Grab a towel and wrap it around the base of the handle (this will protect your hand from getting sliced open by any jagged edges). 

Step 5: Pull Hard

1. Grab onto the handle with both hands.

2. Put one foot up on the shower door for leverage.

3. Pull hard until the handle comes off.

4. If the handle doesn’t come off easily, try using a putty knife or another thin object to pry it off.

5. Once the handle is off, use a rag to clean off any adhesive residue.

6. If there’s still adhesive residue left on the door, you can try using a solvent like Goo Gone or WD-40 to remove it.

7. If all else fails, you can always sand or scrape off the adhesive residue with a razor blade or sandpaper.

Read More: How to Remove Adhesive from Shower Wall?

Step 6: Wipe off the residue and store your doors properly

Now that your handles are removed, it’s time to clean up the adhesive residue. You’ll need a mild cleaner and a soft cloth to do this. Apply the cleaner to the residue and gently rub it away. Be sure to rinse the area well afterward.

Last Opinion

If you’re looking for an easy way to remove your shower door handles, look no further than this step-by-step guide. In just ten steps, you’ll have those handles off in no time. And the best part? You won’t need any harsh chemicals or solvents. So what are you waiting for? Let’s get started!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *