How to Use Spray Adhesive on Fabric

Spray adhesive is designed to stick items together without needing sewing or stapling, making it perfect for projects where you don’t want any visible stitches or staples. 

Spray adhesive comes in several formulas, with variations in drying time and flexibility after drying, so knowing how to use spray adhesive on fabric may require some experimentation. 

Follow these steps to get the best results possible when using spray adhesive on fabric.

Read More: How To Use Spray Adhesive on Paper?

What Fabrics Can I Bond Using Spray Adhesive?

You can use spray adhesive on almost any fabric, including cotton, denim, felt, fleece, vinyl, and corduroy. When bonding two pieces of fabric together, it’s important to ensure that both surfaces are clean and debris-free. Otherwise, the bond may not be as strong.

Read More: How Strong Is Fabric Glue?

Can You Bond Different Materials Together with Spray Adhesive?

Spray adhesive is a versatile product that can bond many different types of materials together. It’s perfect for bonding fabric to fabric or other surfaces like wood or metal. You can even use it to bond two different types of fabric together!

How to Use Spray Adhesive on Fabric?

Things You Will Need

Before using spray adhesive on fabric, you will need to gather some supplies. You will need the fabric you want to adhere, scissors, a pencil, measuring tape, and spray adhesive. Once you have all your supplies, you are ready to start!

Step 1 – Prep Your Surface

Ensure the area you’re working in is well-ventilated and dust-free. Cover surfaces you don’t want adhesive on with newspapers or a drop cloth. Place your fabric piece face-down on a flat surface. If it’s wrinkled, iron it first.

Step 2 – Measure and Apply The Glue

Before spraying, you need to ensure you have the right amount of adhesive. Too much glue will cause the fabric to wrinkle, while too little won’t provide a strong enough hold. 

Hold the can about six inches from the fabric to measure and spray a test strip. Once you have the perfect amount, apply it to your project in even strokes.

Step 3 – Spray From All Directions

Hold the can about 10 inches away from the fabric when ready to spray. Begin by spraying in a circular motion and then move to back-and-forth strokes. 

Be sure to cover the entire surface of the fabric with an even layer of adhesive. If necessary, continue spraying until you get the desired thickness of the coating.

Read More: Can I Use Spray Adhesive for Wallpaper?

Step 4 – Let It Dry

After you’ve applied the adhesive, let it dry for at least 15 minutes before proceeding. This will allow the glue time to set and help ensure that your fabric adheres appropriately. 

You can also use a hair dryer to speed up the drying process. Just be sure not to hold the dryer too close to the fabric, as this could cause the adhesive to become too hot and damage your project.

Read More: How To Remove Adhesive From Clothing?

Step 5 – Cut Out Your Shape

Carefully remove the excess fabric around your design. You can use scissors, an x-acto knife, or a rotary cutter. If using an x-acto knife or rotary cutter, cut on a self-healing mat to protect your surfaces.

Step 6 – Peel Off Your Paper Backing

Now that your adhesive is dry, it’s time to peel off the paper backing. Starting at one corner, slowly and carefully peel the backing away from the adhesive. 

If the adhesive is not peeling away easily, stop and let the adhesive dry for a few more minutes before trying again.

Step 7 – Finishing Off

Finishing off is the process of adding any final details to your project. This includes things like adding buttons, snaps, or velcro. 

It’s also an excellent time to check over your work and ensure everything is as perfect as you want it to be if you’re happy with everything, congratulations! 

You’ve just completed your first project using spray adhesive.

Read More: What Can I Use Instead of Spray Adhesive?

Can you use Elmer’s spray adhesive on fabric?

You bet! Elmer’s spray adhesive is perfect for bonding fabric to various surfaces. Plus, it’s easy to use and provides a strong, permanent hold. Here’s how to do it

Can I use fabric glue instead of sewing?

You can use fabric spray adhesive to attach the fabric to other surfaces like wood, glass, or metal. It’s a great way to get a perfect hold without sewing or using other fasteners. And best of all, it’s temporary, so you can remove and reposition the fabric as needed. Just be sure to test the adhesive on an inconspicuous area first to make sure it doesn’t damage the fabric.

Does fabric spray adhesive wash out?

No, fabric spray adhesive is permanent. Once it’s dry, it’s there for good. That’s why it’s essential to be careful when using it and to ensure you get the placement right the first time.

Last Opinion

Spray adhesive is the way to go if you’re looking for a quick and easy way to get a perfect hold on your fabric projects. Just be sure to follow the directions on the can, and work in a well-ventilated area. With some practice, you’ll be an expert in no time!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *